(For waterproofing materials information go that page on this site: https://www.jvsbs.com/topics/materials/waterproofing/ or one of these other pages: Coatings, Sealers and Stains, Deck Restoration, Penetrating Sealers, Paint and Coatings)
Brick
Colorless Coatings for Brick Masonry – Brick Industry Association Tech Note 6A
Although penetrating sealers and other coatings applied to clay brick can produce positive outcomes there are disadvantages and dangers that can accompany their use. This Brick Industry Association Technical Note discusses their benefits, possible detrimental effects, the types of colorless coatings available, performance criteria and properties, and information on how to apply them. For use on exterior walls water vapor transmission rate of the material is important. The acceptable criteria is a water vapor permeability of at least .98 as determined by ASTM E96.
CMUs
Durable Waterproofing for Concrete Masonry Walls: Redundancy Required
Single wythe walls are inexpensive and their simplicity can mean that they lack features that act as drainage elements in other types of walls. This article offers standard solutions and information on tests that can determine if concrete masonry units (CMUs) in the wall are absorbing more water than they should.
Concrete
Advice on Choosing and Applying Concrete Sealers
This ConcreteNetwork.com page has links to articles on applying waterproofing on hot days, applying it when it’s cold, selecting the right waterproofing, buffing finish coats, tinted sealers, VOC considerations, why different waterproofing materials perform differently and the compatibility of water and solvent based sealers.
Concrete Coatings, Sealers and Stains
Concrete is an extremely durable material and under many conditions it weathers quite well. For many reasons, such as the need to use de-icing chemicals, erosion resistance, asthetics, resistance to traffic and water repellency, to name a few, coatings, sealers and stains are called for. Manufacturers have responded to the market with myriad products that fall under numerous categories. The products, manufacturer’s and categories on this page are some of those that commercial building restorations consultants specify and contractors warranty.
Wisconsin Dept. of Transportation Evaluation of Concrete Deck and Crack Sealers
Of the thirteen penetrating sealers studied in 2005 to determine their effectiveness in sealing concrete for road surfaces two products, Sonneborn Penetrating Sealer 40 and Hydrozo Silane 40 surpassed the rest having the best performance and greatest depth of penetration, which was 3.1 mm for Sonneborn Penetrating Sealer 40 and 3.8 mm for Hydrozo Silane 40. Of the ten sealants tested in the study two were deemed best, Sikadur 55 SLV and Dural 335.
Top 10 Concrete Sealer Questions
What concrete surfaces should be sealed? What if the concrete surface isn’t sealed? What’s the price of concrete sealers? What will the sealed concrete surface look like? How is concrete sealer applied and can I apply myself? When do I apply concrete sealer? What will my concrete sealer repel? Will concrete sealer make my concrete slippery? How long will my concrete sealer last? Is concrete sealer environmentally friendly?
Penetrating Sealers
Penetrating Sealer Application
This abuildersengineer.com article is on environmental and surface conditions, surface preparation, coverage rates and methods for applying penetrating sealers.
Waterproofing Membranes
Barrett Company
Barrett’s products are representative of waterproofing solutions at the other end of the continuum that begins with penetrating sealers. Barrett’s membranes are heavy, rubber polymers and asphalt that, in some cases, are combined with felt to form systems that are used on roofs, walls and below grade.
Soprema Products Brochure
Soprema Corporation is a top manufacturer of waterproofing products. Their membranes are for below grade foundation waterproofing, air and vapor barriers, low slope roofing and roofing underlayment, plaza decks, balconies, patios and parking garages.
